July 16, 2021

Friday Funny 07-16/2021 (Hard at Work)

 

RUN!

It seems like we have been tied to the dock, and let the end of June, and the beginning of July slip through our fingers. In reality, we have been busy with boat projects, and we feel great about our progress. Do boat projects ever end you might ask, the simple answer, is "no".

We typically back into our slip, but this time, we went bow in, so that we could work on the different sides of the boat. Bill put new "eyebrows" over the ports on my side, so that we could open them, and not worry about the rain coming in. He also fixed the cracked one, so all is good on my side of the back cabin. 

Hard at work.


I sewed new bug screens, with no-see-um netting, and they easily snap on. Gus likes to sit on the shelf, and test for bug proofness.

Hard at work.


We have our Spade anchor as the main bower, and Bill put the Super Max on, as the backup, then he took it back off. It contributed to too much weight on the bow, so rethinking that is in progress.


I took advantage of some of the sunny weather to wash, and polish the starboard side of the boat. I used the dinghy to pull myself along, it's hard work pulling to keep yourself close to the boat, and pushing the rags to wash, and polish. I also cleaned the toerail, the stantions, and the stainless cable while I was there, get it all done at once. My arms got a work out! I got a sunburn, but it was worth it.

Those blue things on the side of my head are my earbuds, listening to music, or an audio book keeps me motivated.

Shiny, and clean.

Bill decided that he wanted a diesel drip stove in the pilothouse, to be able to see the warm flame on a cool evening. While the weather was good, with no chance of rain, he cut a hole in the pilothouse cabin top, for the stovepipe, 


Oh, what's another hole in the boat....


The stack top is installed, and now we can wait till later to finish the rest of the heater.

We had some pretty hot days, well, at least for us, this weather station sits in the sun, with the curtains closed behind it.


This is how Gus weathered the hot days.

Hard at work.

I decided to tackle changing the mizzen sail cover, and I had to eject the resident spiders that lived in it. UGH! I hate bugs. It's the burgundy color that matches the dodger, bimini, and weathercloths, now all that is left to redo, is the main sail cover, and all the major canvas will be done. There's still a few things on the, do later list, winch covers, seatback covers, compass cover, and windlass cover.


Gus contributes to the quality control of anti-chafe vinyl.

Hard at work.


The best project of all, we redid the majority of the deck non-skid. The prep of sanding, chiseling, applying epoxy in patches, more sanding, washing, and taping seemed to take forever. Our good friends from Petersburg, Jim, and Robin came to help, and we're SO GRATEFUL, we couldn't have gotten the job done without them. 



All prepped, and ready for tape.



Here goes.... we're hoping that we get at least 12 hours without rain.



Bill spread the Kiwigrip, and rolled it to the desired nonskid tread, I pulled tape as he progressed, since you're not supposed to let it dry before removing the tape.



Jim is helping with cleanup, and tape removal, meanwhile Robin is working in the cockpit.


We're very pleased with the results, we didn't get to the whole boat, and we didn't get to the trim paint, but we did get the most important parts painted with non-skid, the ones that would affect our safety. Now that we know the procedure, we can do additional painting at anchor, anywhere, whenever we have good weather to apply it.





Gus is always ready to supervise.

Hard at work.

As always, we enjoy hearing from you, either here in comments or on our Facebook Denali Rose Sailboat page.



June 25, 2021

Friday Funny 06-25/2021 (Whatever Floats Your Boat, House)

 

"Easy DIY Floathouse"

I recently replaced the zippers on a heavy vinyl/canvas enclosure that belongs to a commercial fishing boat. The owner, Les, saw me creating the new dodger/bimini last summer, and asked if I would help him out.  I said sure, but we've had a hard time connecting with Denali Rose, and Venus being in our slips at the same time. We ran into each other recently at a local cafe, and it all came together!

In addition to his fishing vessel, Les also has a floathouse that he keeps on our dock, and it was a very convenient place to set up sewing. 


Those large grey tarps needed their connecting zippers replaced, and I patched a few chafed areas also.

 
Inside the floathouse, definitely a guy's domain.



Before outboards, the floathouse was usually towed to the Stikine River for hunting, and tied off, or anchored, but Les was cited for not having a State of Alaska Vessel permit (?), even though it's a house (?). So  he put some outboards on, registered it with the state, and VOILA, a vessel is born. Go back up, and look at the front porch again, you'll see a steering pedestal on the front, with controls for the rear outboards, and an anchor sitting right in front. This is the ultimate in "if you don't like the neighborhood, move", conveyance.

This conversion solves several issues. Most folks go hunting up the Stikine River which is part of the Tongass Natl forest, and the Forestry Service doesn't like float houses tying off to the shore, and the local harbor commission doesn't like floathouses in the marina, so, yippeee, it's a vessel! Pretty funny to see this "house", vessel underway.


The finished canvas project.



And rolled up on the boat, ready for deployment. Venus fishes in the Gulf of Alaska, and when heavy weather comes in, they roll the curtains down, and continue working.



As always, we enjoy hearing from you, either here in comments or on our Facebook Denali Rose Sailboat page.